Multi-Process In One Place
Tube parts may need cutting, bending, chamfering and end forming; separating the process into unrelated machines creates layout, tooling and quality risk.
Tube Bending & Fabrication Solutions
Machine, Tooling And Process Route Planning For Tube Fabrication Lines
Send your tube drawing, material and output target. Telhoo helps plan the right cutting, bending, chamfering, end forming, tooling and automation route, then recommends the machine configuration behind it.
Quick Answer
Tube bending and fabrication solutions turn a tube drawing into a practical equipment and process route. Telhoo reviews the pipe size, wall thickness, material, bend radius, end condition and output target, then matches CNC or NC bending, pipe cutting, chamfering, tube end forming, tooling and optional automation for round, square and profile tube from Φ38 to Φ219 mm.
The Challenge
What Makes A Tube Fabrication Line Hard To Plan
Buyers planning tube fabrication often need several machines to work as one process. Telhoo helps connect the equipment, tooling and sequence before you invest.
Drawing-Driven, High Mix
Different part drawings need different dies, radii, end forms and control programs; the machine plan must handle that changeover.
Repeatable Export Quality
Overseas buyers need a reliable machine configuration, documentation, packing and installation support, not a one-off sample run.
Mixed Materials
Steel, stainless, copper and aluminum each bend differently and need matched dies and speeds.
Cost & Freight Control
Planning the process with one machine builder reduces tooling mismatch and avoids buying equipment that cannot work together.
A Factory You Can Trust
You need a verified machine manufacturer with real engineering capacity, not a trading middleman.
How Telhoo Does It
A Full Pipe-Processing Line, Planned From One Factory
Telhoo is the machine manufacturer behind the process: our engineers match the cutting, bending, chamfering and end forming machines, then confirm tooling, control options and layout around your part drawing.
Because we build the equipment, we can match tooling to unusual profiles and offer non-standard or automated cells when your volume grows. Explore the machine ranges behind the solution:
CNC Automatic Pipe BendingMulti-bend, high-volume bending Φ38–219
NC Semi-Automatic BendingCost-effective bending for medium batches
Automatic Pipe CuttingClean, repeatable blanking before bending
Pipe ChamferingDeburred, weld-ready tube ends
Tube End FormingExpanding, reducing and shaping ends
Double Head BendingTwo bends per cycle for symmetrical parts
Capacity Range
What A Tube Fabrication Line Can Cover
DiameterΦ38–219 mm
Round, square and profile tube
Materials4 Families
Steel, stainless, copper, aluminum
ProcessesCut · Bend · Chamfer · Form
Machine sequence in one plan
Process Capability
Process Capability You Can Plan Around
Each process depends on the right machine, tooling and control method, so the production line can repeat reliably batch after batch.
Mandrel Anti-Wrinkle Bending
Moving-mandrel tooling keeps thin-wall tube round and wrinkle-free.
Radius & Springback Control
CNC over-bend compensation hits target angles first time.
±0.1° Repeatability
Servo control holds tight tolerance across long runs.
Multi-Bend Programming
Up to 99 bends per pipe with 3D simulation and CAD import.
Why Telhoo
A Pipe Processing Partner, Not Just A Machine
Jiangsu Telhoo has manufactured pipe bending, cutting, chamfering and end forming machines for over 35 years and exports to buyers in more than 65 countries. When you plan a tube processing line with Telhoo, the same in-house R&D, tooling knowledge and manufacturing control stand behind the machine recommendation.
- In-house R&D, machining and assembly
- CE, ISO9001, UL and EAC certified
- Non-standard and OEM machines built to your line
Telhoo By The NumbersZhangjiagang, China
Experience
35+
Years manufacturing pipe processing machinery
Facility
30,000 m²
Modern production plant with in-house R&D
Export
65+
Countries served across five continents
Response
24 h
Typical reply time on your quotation
In Depth
Why Buyers Plan Tube Fabrication Lines With Telhoo
A closer look at how one equipment builder can reduce tooling mismatch, process risk and unnecessary machine investment.
Planning a tube fabrication line around separate equipment suppliers means juggling different control systems, tooling assumptions and after-sales teams. Telhoo consolidates cutting, CNC and NC bending, chamfering and tube end forming equipment under one engineering workflow, so the line is specified as a connected process rather than a pile of unrelated machines.
Because we design and build our own pipe processing machines, the tooling knowledge that goes into the equipment also guides your process plan. That lets us match dies to unusual round, square and profile sections, choose CNC or NC control where it makes sense, and scale from a single machine to an automated cell without changing supplier.
What The Tube Fabrication Solution Covers
- Cutting to length with CNC pipe saws
- Rotary-draw and mandrel bending from Φ38 to Φ219 mm
- Chamfering and deburring for weld-ready ends
- Tube end forming — expanding, reducing and flaring
- Export packing, installation and spare-parts support for the equipment
Telhoo equipment is used for mild steel, stainless steel, copper and aluminum tube in automotive and exhaust, furniture and fitness, HVAC and boiler, and marine and structural work. Send a drawing, STEP file or sample with your tube size, material, radius and output target, and our engineers reply with feasibility, tooling and a machine quotation, usually within 24 hours.
Case Study · Thailand
Copper Coil Bending For A Heat-Exchanger Maker
A 63CNC-4A2S replaced manual benders for precise, scratch-free copper coil forming.
Read Case
Case Study · Thailand
Heavy Steel Tube Bending For A Structural Fabricator
A 115NC hydraulic bender delivered wrinkle-free forming on thick-walled tube.
Read Case
All Cases
See More Telhoo Deliveries
Browse every commissioned machine and the results reported by the customer.
View All CasesRequest A Quote
Get A Tube Processing Line Quote
Send your tube drawing and output target, and Telhoo will recommend the machines, tooling and process route for the cut-bend-chamfer-form cycle.
- 1Send Your Drawing And Output Target
Share tube size, wall thickness, material, radius, end form and target output.
- 2Engineering Review
We confirm feasibility, tooling, layout and the right machine configuration.
- 3Tailored Quote In 24h
You receive a machine and tooling quotation, usually within one working day.
FAQ
Common Questions About Tube Bending & Fabrication Solutions
Yes. Telhoo reviews your drawing, pipe diameter, wall thickness, material, radius and quantity, then recommends the cutting, bending, chamfering, end forming, tooling and automation configuration behind the line.
Telhoo equipment covers round, square and profile tube from Φ38 to Φ219 mm in mild steel, stainless steel, copper and aluminum, depending on the selected CNC, NC, cutting, chamfering and end forming machines.
Yes. Telhoo can recommend a simple single-machine setup for flexible work or a more automated line for repeat production. Tell us your part numbers and output target and we will confirm the route.
Lead time depends on machine model, tooling, automation level and testing requirements. After we review your drawings, we confirm the configuration and delivery schedule.
Yes. Telhoo builds custom tube bending equipment, tooling and non-standard pipe processing machines according to drawings, tube material, radius and output requirements.
Yes. With over 35 years of OEM export experience to 65+ countries, we provide heavy-duty seaworthy packing and full export documentation.
Custom equipment and process planning available
GET A FREE QUOTE
Ready To Plan Your Tube Processing Line?
Share your pipe drawing, material, radius and output target, and our engineers reply with a tailored machine and tooling recommendation within 24 hours.