Max Pipe Size
The model number follows the guide capacity: JW-80 rolls Φ80 × 2 mm carbon steel pipe; JW-219 reaches Φ219 × 12 mm.
Pipe Rolling Machine
Mechanical Tube Rolling For Circles, Arcs, Spirals And Profiles
Telhoo pipe rolling machines — also called tube rolling machines or pipe roller machines — use full mechanical three-roller drive to roll carbon steel pipe, round tube and profile sections into large-radius circles, arcs and spirals.
The Range
Pipe Rolling Machine Models
The JW series covers the practical rolling range from JW-40 to JW-219. Product cards below show the two models with available factory photos, while the comparison table lists the full catalogue range for quotation and model selection.
Pipe Rolling Machine JW-80
Rolls carbon steel pipe up to Φ80 × 2 mm into large-radius circles, arcs and spirals with a minimum bend radius of Φ800.
View Details
Pipe Rolling Machine JW-120
Larger mechanical pipe rolling machine for carbon steel pipe up to Φ120 × 8 mm, with Φ300 mold diameter and 22 kW motor power.
View DetailsModel Comparison
Compare JW Pipe Rolling Machine Models
The catalogue range starts at JW-40 for small tube and scales to JW-219 for heavy pipe rolling. Figures below come from Telhoo's product catalogue and should be confirmed against your pipe material, wall thickness and required radius before quotation.
| Model | Max Carbon Steel PipeΦ × wall, mm | Min Bending Radiusmm | Bending RadiusD | Rolling Speedm/min | Mold Diametermm | Motor PowerkW | Weightkg |
|---|---|---|---|---|---|---|---|
| JW-40 | Φ40 × 2 | Φ320 | ≥10D | 12 | Φ120 | 4 | 1200 |
| JW-60 | Φ60 × 2 | Φ480 | ≥10D | 10 | Φ171 | 5.5 | 1500 |
| JW-80 | Φ80 × 2 | Φ800 | ≥10D | 8 | Φ220 | 11 | 3000 |
| JW-100 | Φ100 × 5 | Φ800 | ≥10D | 8 | Φ300 | 15 | 5000 |
| JW-120 | Φ120 × 8 | Φ960 | ≥10D | 8 | Φ300 | 22 | 6000 |
| JW-168 | Φ168 × 12 | Φ1344 | ≥10D | 8 | Φ400 | 30 | 10000 |
| JW-219 | Φ219 × 12 | Φ2199 | ≥10D | 10 | Φ700 | 45 | 12000 |
This is a full mechanical drive pipe rolling machine series. If your project has a special drive requirement, tell us first and we will confirm the suitable configuration before quotation.
How It Works
How A Pipe Rolling Machine Works
A pipe rolling machine forms long tube gradually instead of forcing one tight bend. The rollers grip and feed the pipe, the roller distance sets the curvature, and repeated passes create circles, arcs and spirals with smoother stress distribution than a single-hit bend.
- 1
Full Mechanical Drive
Driven rollers provide stable rolling force and high reliability for medium and large batch production.
- 2
Set Roller Distance
Changing roller spacing changes curvature, allowing different circles, arcs and spiral shapes.
- 3
Match Mold Groove
Change the groove to roll round pipe, angle steel, flat steel, round steel or special profiles.
- 4
Roll And Repeat
The pipe roller machine repeats the same pass path for consistent radius and production rhythm.
Reading The Spec
What The Rolling Specs Mean For You
Rolling jobs are decided by diameter, wall thickness, radius and section shape. These four numbers tell you whether the tube rolling machine can hold, drive and form your part.
Minimum Radius
Large-radius rolling starts from the listed minimum radius. Most models are specified at 10D or above for stable rolling.
Mold Diameter
The mold diameter and groove support the pipe surface; profiles and angle rolling need matched grooves.
Drive Power
Motor power rises from 4 kW to 45 kW as pipe size and wall increase, giving enough torque for steel rolling machine work.
Selection Guide
How To Choose Your Pipe Roller Machine
Send a drawing or sample if possible. The model is confirmed by pipe size first, then radius, section shape and production output.
- By Pipe OD & Wall
Match your largest carbon steel pipe to the catalogue table, then leave margin for material strength and batch output.
- By Radius & Shape
Circles, arcs and spirals are standard rolling shapes. Tight bends and elbows belong to the CNC pipe bending machine range.
- By Section Type
Round pipe, angle steel, flat steel, round steel and special profiles need different mold grooves and contact surfaces.
- By Output Rhythm
Rolling speed, motor power and machine weight affect production stability for large and medium mass production.
Materials & Profiles
What The Tube Rolling Machine Can Roll
The catalogue states that the JW series can machine metal profiles by changing the mold groove. That makes the same platform suitable for pipe rolling, angle rolling and section rolling when tooling is matched correctly.
01
You roll
Round pipe & tube
Telhoo fits
Standard pipe grooves for carbon steel tube circles, arcs and spiral sections.
02
You roll
Angle steel
Telhoo fits
Angle rolling machine work requires a groove that supports both legs without twisting.
03
You roll
Flat steel & bars
Telhoo fits
Steel rolling machine tooling keeps flat and round bar sections aligned through repeated passes.
For section rolling or tube roll forming, send the profile drawing, material grade, wall thickness and target radius so Telhoo can confirm roller groove design.
Applications
Where Pipe Rolling Machines Go To Work
A tube rolling machine is used when the part needs a large, controlled radius rather than a short elbow: guard rings, circular frames, coils, spiral pipe and curved steel profiles.
Real Rolling TestFactory video and photos show the mechanical roller head and operator workflow, not a rendered scene.
Round Guard Rings
Large circular tube parts for machinery guards, fitness equipment and steel frames.
Architectural Arcs
Curved handrail, canopy, railing and decorative profile sections in mild or stainless steel.
Spiral Pipe Sections
Helical tube and coil shapes for process equipment, heat exchange and custom fabrication.
Angle & Section Rolling
Angle steel, flat steel and special profile work when matched groove tooling is supplied.
Boiler & Heat Equipment
Curved steel tube components that need repeatable radius and stable circularity.
Custom Fabrication
Large-radius parts that are too gradual for a standard pipe bender but too precise for manual rolling.
How We Deliver
From Drawing To Rolling Test
1
Part & Radius Review
We review OD, wall, material, radius, circle diameter and profile drawing.
2
Model & Groove Proposal
Engineers confirm the JW model and roller groove needed for the section.
3
Manufacturing & Assembly
The pipe rolling machine is built, wired and assembled in Telhoo's factory.
4
Sample Rolling Test
We test sample pipe or profile when supplied, checking radius, roundness and surface.
5
Export Packing
Mechanical parts and control cabinet are braced and packed for ocean freight.
6
Install & Train
Telhoo supports installation, operator training and spare roller / groove support.
Why Telhoo
A Pipe Processing Partner, Not Just A Roller
Telhoo builds pipe bending, pipe rolling, cutting, chamfering and end forming machines in Zhangjiagang. That matters when a project needs a full workflow: cut the tube, roll the ring, bend the branch part, then finish the ends in one supplier system.
- 35+ years manufacturing pipe processing machinery
- In-house model selection, groove tooling and sample test support
- Complete line thinking across rolling, bending, cutting and forming
JW Series At A Glance
Mechanical Drive
Range
7
Catalogue models from JW-40 to JW-219
Capacity
Φ219
Maximum listed carbon steel pipe diameter
Power
45 kW
Largest listed drive motor power
Shapes
3
Circles, arcs and spirals with matched tooling
Export & Delivery
From Our Factory To The World
Every Telhoo pipe rolling machine is tested, packed and loaded with the same export process used for our bending and cutting machines.
01Crating & Bracing
Heavy frames, roller shafts and control cabinet are protected before shipping.
02Iron-Frame Packing
Large rollers and mechanical drive machines get a reinforced packing base.
03Container Loading
We send loading photos and export documents before the machine leaves port.
04Worldwide Shipping
Telhoo exports pipe processing machines to buyers in more than 65 countries.
For JW-168 and JW-219 heavy models, confirm container type, lifting method and installation space with Telhoo before ordering.
Request A Quote
Tell Us What You Need To Roll
Send your pipe or profile drawing and our engineers will confirm the JW model, roller groove, radius feasibility and quotation, usually within one working day.
- 1Send Your Profile
Share OD, wall, material, radius, circle diameter and section drawing.
- 2Engineering Review
We confirm mechanical drive model, groove tooling and rolling sequence.
- 3Tailored Quote In 24h
You receive model, tooling and delivery recommendations for your job.
Pipe Rolling FAQ
Pipe Rolling Machine Questions
A pipe rolling machine uses driven rollers to form pipe and tube into large-radius circles, arcs and spirals. It is different from a rotary draw pipe bending machine, which makes tighter angle bends and elbows.
Yes. Telhoo catalogue data states that angle steel, flat steel, round steel and special-shaped cross-section profiles can be machined by changing the mold groove. Send your section drawing so we can confirm the correct roller groove.
Yes. The Telhoo catalogue lists the JW pipe rolling machine series as full mechanical drive equipment, built for stable rolling force and reliable medium to large batch production.
Choose by maximum pipe diameter and wall thickness first, then required radius, rolling speed and mold diameter. The range covers JW-40 to JW-219 for carbon steel pipe from Φ40 × 2 mm to Φ219 × 12 mm.
Mechanical pipe, tube and profile rolling
GET A FREE QUOTE
Get A Quote For A Pipe Rolling Machine
Send your pipe size, material, profile drawing and target radius, and Telhoo engineers will recommend the right JW model and roller groove.