Max Saw Blade OD
A larger blade cuts a larger pipe section. The 350CNC takes a Φ350 blade, the 425CNC a Φ400 blade for bigger work.
Automatic Pipe Cutting Machine
CNC Feeding, Clamping & Cutting
Telhoo automatic pipe cutting machines are CNC tube cutting machines that feed, clamp and saw carbon steel, stainless steel and other metal pipe into clean, repeatable lengths, ready for bending and end forming.
The Range
Pipe Cutting Machine Models
CNC pipe cutting machines with automatic feeding, clamping and cutting for carbon steel, stainless steel and other metal pipe. CNC length control delivers clean, repeatable blanking that feeds straight into bending and forming lines.
350CNC Automatic Pipe Cutting Machine
Auto feeding, auto clamping and auto cutting with CNC length control for accurate, burr-controlled batch cutting.
View Details
425CNC Automatic Pipe Cutting Machine
Larger-capacity CNC cutting for bigger pipe sections, keeping the same automatic feed, clamp and cut cycle.
View DetailsModel Comparison
Compare The Pipe Cutting Machine Models
Both models share the same automatic feed, clamp and cut cycle. The 425CNC takes a larger saw blade and pipe section. Figures are the rated values for each model.
| Model | Max Saw Blade ODmm | Max Round Pipemm | Feeding Lengthmm | Main MotorkW | Spindle SpeedRPM | Weightkg |
|---|---|---|---|---|---|---|
| 350CNC | Φ350 | Φ100 | 1000 | 4.5 / 5.5 | 60 / 120 | 1300 |
| 425CNC | Φ400 | Φ130 | 1000 | 4.5 / 5.5 | 30 / 60, 60 / 120 | 1400 |
Both models run a 2.2 kW hydraulic pump with a 0.09 kW cooling system in a 3000 × 1100 × 2000 mm frame. Confirm the final saw blade and cutting configuration for your pipe with our engineers before ordering.
How It Works
How An Automatic Pipe Cutting Machine Works
A CNC cutting machine turns full-length pipe into accurate, repeatable blanks with almost no operator input. The pipe is fed to a programmed length, clamped, cut with a circular saw blade under coolant, then indexed for the next piece, batch after batch at the same length.
- 1
Auto Feed To Length
The servo feeder pushes the pipe to the programmed cut length set on the CNC control.
- 2
Hydraulic Clamping
The pipe is clamped tight so it cannot shift or vibrate during the cut.
- 3
Circular Saw Cut
The saw blade cuts through under coolant for a clean, low-burr, square end.
- 4
Index & Repeat
The blank is released and the feeder indexes forward, repeating the batch automatically.
Reading The Spec
What Each Cutting Spec Decides
The comparison table lists the numbers. Here is what each one decides when you match a cutting machine to your pipe and your batch.
Max Round Pipe
The largest round pipe the machine cuts, Φ100 on the 350CNC, Φ130 on the 425CNC. Square and profile sizes are confirmed per job.
Feeding Length
The stroke fed per cycle (1000 mm), with CNC length control for accurate, repeatable blank lengths batch after batch.
Spindle Speed
Two-step spindle speeds let you match cutting speed to pipe material and wall for a clean cut and long blade life.
Selection Guide
How To Choose Your Cutting Machine
Match the machine to your largest pipe, your material and how the blanks feed your line.
- By Pipe Size
Up to Φ100 mm round pipe the 350CNC covers most work. Up to Φ130 mm choose the larger 425CNC.
- By Material & Wall
Carbon steel, stainless and other metal pipe. Blade grade and spindle speed are matched to the material and wall.
- By Length & Batch
CNC length control gives accurate, repeatable blanks, so long production runs stay consistent with minimal operator input.
- By The Next Process
Cutting usually feeds bending and end forming. See tube bending & fabrication to plan the full line.
Materials
Which Pipe Materials It Cuts
Cut quality comes from matching blade and speed to the pipe. Tell us what you cut and we supply the matching blade and cutting parameters.
01
You cutCarbon steel pipe
Telhoo fits
Cold-saw blade and matched speed for clean, square, low-burr cuts on structural and mechanical tube.
02
You cutStainless steel pipe
Telhoo fits
Lower spindle speed and coolant keep stainless cuts cool, clean and free of heat discoloration.
03
You cutAluminum & non-ferrous
Telhoo fits
High-speed blade and light feed give burr-free cuts on soft aluminum and non-ferrous pipe.
Every cutting machine ships with saw blade, coolant system, sensors and operation manual.
Applications
Where Tube Cutting Machines Are Used
Telhoo tube cutting machines blank round, square and profile tube in mild steel, stainless steel, copper and aluminum for these industries worldwide, wherever a clean, repeatable pipe cutting machine feeds downstream bending and forming.
Saw Cutting LineThe 350CNC and 425CNC saw cutting machines, used before bending, chamfering and end forming.
Automotive Exhaust & Frames
Muffler and exhaust pipe, seat frames and chassis tube in round and profile sections.
HVAC & Refrigeration
Air-conditioning coils, heat pump lines and copper or aluminum refrigeration tube.
Furniture & Fitness Equipment
Chair and table frames, gym racks and equipment tube in round and profile sections.
Shipbuilding & Marine
Thick-wall carbon steel pipe for marine, offshore and structural fabrication.
Boiler & Heat Exchanger
Serpentine and coil tube for boilers, heat exchangers and power equipment.
Construction & Handrail
Stair rails, guardrails and architectural tube in stainless and mild steel.
How We Deliver
From Inquiry To Installation
1
Requirement & Pipe Analysis
We review your pipe size, wall thickness, material, cut length and target output.
2
Model & Tooling Proposal
We confirm the model and match the saw blade and clamping.
3
Manufacturing & Assembly
Your machine is built and assembled in our 30,000 m² factory.
4
Sample Cutting & Test
We cut your sample parts and inspect them before shipment, FAT on request.
5
Export Packing & Shipping
Heavy-duty seaworthy packing, full documents and door-to-door logistics.
6
Install, Train & Support
Overseas installation, operator training and long-term spare parts.
How Your Machine Is Shipped
01Crating & Bracing
Each machine is wrapped, braced and lifted into a custom case so nothing shifts in transit.
02Iron-Frame Packing
Heavy machines get an iron-frame base and sealed case, rated for long ocean freight.
03Container Loading
We load 20ft, 40ft and open-top containers in our own yard and send photos before departure.
04Worldwide Shipping
Machines leave Zhangjiagang by sea to buyers in 65+ countries, with complete export paperwork.
Why Telhoo
Built And Supported By The Same Factory
We design and build the machine in Zhangjiagang and handle the tooling and after-sales ourselves.
- In-house R&D, machining and assembly
- CE and ISO9001 certified
- Non-standard and OEM machines built to your line
Telhoo By The Numbers Zhangjiagang, China
Experience
35+
Years manufacturing pipe processing machinery
Facility
30,000 m²
Modern production plant with in-house R&D
Export
65+
Countries with Telhoo machines
Response
24 h
Usual reply time for a quotation
Request A Quote
Tell Us What You Need To Make
Send your tube or pipe specs and an engineer will reply with a machine or process and a quotation, usually within one working day.
- 1Send Your Requirements
Share tube size, wall thickness, material, bend radius and quantity.
- 2Engineering Review
We check feasibility and tooling and choose the machine or process.
- 3Quotation In 24h
You receive a detailed quotation, usually within one working day.
Pipe Cutting FAQ
Pipe Cutting Machine Questions
Carbon steel, stainless steel and other metal pipe. The 350CNC and 425CNC differ mainly in maximum pipe section. Send your pipe diameter, wall thickness and cut length and we will confirm the right model.
Yes. Automatic clamping and CNC length control give clean, repeatable, burr-controlled blanks that feed directly into pipe bending and end forming without extra preparation.
Yes. Telhoo builds non-standard and automated solutions, so the cutting machine can be combined with bending and end forming cells. Tell us your workflow and output target.
None in practice, because "pipe cutting machine" and "tube cutting machine" describe the same equipment. Pipe usually means larger structural sections and tube means smaller thin-wall sizes. The Telhoo 350CNC and 425CNC tube cutting machines handle both, using a circular saw blade rather than laser or plasma.
Because blade surface speed has to fall as diameter rises. The 425CNC adds 30 / 60 RPM on top of 60 / 120 RPM so that large-diameter and thick-wall sections can be cut without burning teeth off the blade. That low range is what makes the extra Φ130 mm capacity usable rather than nominal.
It depends on the model, 350CNC or 425CNC, and on the blade and options for your pipe. Send your pipe size, material and cut length and we reply with a model and a price.
Yes. Send a sample length and we cut and inspect it before shipment. A factory acceptance test is available on request.
Custom and automated lines available
GET A FREE QUOTEGet A Quote For A Pipe Cutting Machine
Send your pipe diameter, wall thickness and cut length, and our engineers will reply with a model and options.
